Table of Contents
Advertisement
Upgrading Your Iomega StorCenter ix12-300r
Software Updates
The Software Updates page identifies the ix12-300r software status and provides the ability to update the
software for the ix12-300r.
Auto-update process: installing a device software update
1.
In the table listing the current software installed on your ix12-300r, click
to check for updates.
2.
The Status column will state whether the software is up to date or if an update is available. To
copy an update file to your ix12-300r, click
to your ix12-300r.
3.
If multiple updates are ready, you may install all the updates at the same time. Click
all pending updates to install the available updates. The software updates are applied to your
ix12-300r.
4.
Once the software is installed, the ix12-300r will reboot. If you are applying multiple updates, you
only need to reboot once. Do not power down the ix12-300r during this time.
5.
If you want to remove the update without applying changes, click
Do not shut down the ix12-300r during the update process as this can damage the ix12-300r. The
ix12-300r will be temporarily inaccessible during the software update. Be sure no critical files are
being accessed.
Manual update process: installing a device software update
1.
In the table listing the current software installed on your ix12-300r, click
to check for updates.
2.
If an update is available, the Status column will state that a software update is available with a
link. Download the update file to your local computer.
3.
To retrieve the update, click
4.
In the Add Software pop-up window, if an update is available, there will be a link to download the
appropriate update for your ix12-300r. Click the link, follow the instructions on the download site
page, and download the software update to your local computer.
Once downloaded, click Browse to select the update, and then click Upload to continue.
5.
When the update is uploaded to the ix12-300r, the Status column will say Ready to apply.
6.
Click
Apply all pending updates to apply the update or updates. The software updates will
be applied to your ix12-300r. If you want to remove the update without applying changes, click
in the Action column.
The ix12-300r restarts once the software is installed. You should not power down the ix12-300r
during the installation process as this can damage the ix12-300r. If multiple updates are ready, all
of them will be applied, requiring only one reboot.
126
Software Updates
. The software update file is downloaded directly
Add Software.
in the Action column
Apply
in the Action column.
in the Action column
Advertisement
Table of Contents
