Advertisement
POWER & CHARGING
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included), connect the speaker to a
powered on computer or USB wall adaptor. The unit will now charge.
Note: The computer must not be in sleep mode.
When the battery is charging, the Charging Indicator on the front of the unit
will display solid red.
When the battery is fully charged, the Charging Indicator will turn off.
When the battery is low on power, the Charging Indicator will flash red.
BLUETOOTH
Pairing to a Device and Playing Audio
1. Power on the unit by sliding the Power Switch to the ON position.
The Pairing Indicator on the front of the unit will slowly flash blue.
2. Press and hold the Pair/Play/Pause button to begin pairing.
The Pairing Indicator will begin flashing quickly. When pairing, remain within
3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select ISB225 in
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 .
Refer to the user's manual for your specific device for instructions on pairing
and connecting Bluetooth devices.
4. When successfully paired, the Pairing Indicator will switch to solid blue and
an audible chime will sound through the speaker.
5. Use the controls on the connected device to select an audio track.
6. Audio played through the connected Bluetooth device will now be heard
through the speaker. Use controls on the unit or your device to play, pause,
and change the volume.
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
unpaired or you find it is unable to connect, repeat the above steps.
INTERNATIONAL SUPPORT
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit
the support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2015 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property
of their respective owners. Specifications are subject to change without notice.
ISB225-1228-01-IB.indd 2
AUX IN
Using Aux In (3.5mm Audio Input)
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio
2. Power on the unit by sliding the Power Switch to the ON position. The unit
3. Use the controls on the connected device to select and play audio.
LIGHTS
If your device should become
1. To turn on the lights, press the Lights button. The lights will automatically
2. To pause the lights, press the Lights button once. Press again to cycle
3. To turn the lights off, press and hold the Lights button.
output/headphone jack on a media player.
will automatically detect the input and switch to Aux In Mode.
The Blue Pairing Indicator on the front of the unit will switch to solid green.
begin cycling through colors.
through the colors.
Note: The lights can be on even if the main Power Switch is in the off position.
Use the Lights button to power the lights on and off.
Made
Green
Protect for Today
Sustain for Tomorrow
3/27/2015 10:23:30 AM
Advertisement
