Maximum Ratings - Toshiba H1 Series Data Book

4. Electrical Characteristics (Tentative)

4.1 Maximum Ratings

Symbol
DVCC3A
DVCC3B
DVCC1A
DVCC1B
DVCC1C
AVCC
V IN
IOL
IOH
Σ IOL
Σ IOH
P D
T SOLDER
T STG
T OPR
T OPR
Note1: If setting it, don't exceed the Maximum Ratings of DVCC3A (PV port and PW port are DVCC3B).
Note2: In PG0 to PG5, P96,P97,VREFH,VREFL maximum ratings for AVCC is applied.
Note3: The maximum ratings are rated values that must not be exceeded during operation, even for an instant. Any
one of the ratings must not be exceeded. If any maximum rating is exceeded, a device may break down or its
performance may be degraded, causing it to catch fire or explode resulting in injury to the user. Thus, when
designing products that include this device, ensure that no maximum rating value will ever be exceeded.
Point of note about solderability of lead free products (attach "G" to package name)
Test
parameter
Solder bath temperature = 230°C, Dipping time = 5 seconds
Solderability
The number of times = one, Use of R-type flux
Solder bath temperature =245°C, Dipping time = 5 seconds
The number of times = one, Use of R-type flux (use of lead free)
Contents
Power Supply Voltage
Input Voltage
Output Current (1pin)
Output Current (1pin)
Output Current (total)
Output Current (total)
Power Dissipation (Ta = 85°C)
Soldering Temperature (10s)
Storage Temperature
Operation Temperature
Operation Temperature
(80MHz)
Test condition
92CZ26A-640
Rating
-0.3 to 3.9
-0.3 to 3.0
-0.3 to 3.9
-0.3 ∼DVCC3A/3B+0.3 (Note1)
-0.3 to AVCC + 0.3 (Note2)
15
-15
80
-50
600
260
-65 to 150
-0 to 70
-0 to 50
TMP92CZ26A
Unit
V
V
mA
mA
mA
mA
mW
°C
°C
°C
°C
Note
Pass:
solderability rate until forming
≥ 95%