Table of Contents
Advertisement
When approval test is done, no Samsung
supplied accessories are avialable but maybe
available later after approval.
Before a new model phone is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the exposure limit
established by the FCC. Tests for each model
phone are performed in positions and locations
(e.g. at the ear and worn on the body) as
required by the FCC.
The highest SAR values for this model phone as
reported to the FCC are:
•
Head: 0.733W/Kg.
•
Bodyworn: 1.13W/Kg.
For body worn operation, this model phone has
been tested and meets the FCC RF exposure
guidelines whenused with a Samsung accessory
designated for this product or when used with an
accessory that contains no metal and that
positions the handset a minimum of 1.5 cm from
the body.
e
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
SAR information on this and other model phones
can be viewed on-line at www.fcc.gov/oet/fccid.
This site uses the phone FCC ID number,
A3LSCHW299. Sometimes it may be necessary
to remove the battery pack to find the number.
Once you have the FCC ID number for a
particular phone, follow the instructions on the
website and it should provide values for typical
or maximum SAR for a particular phone.
Additional product specific SAR information can
also be obtained at www.fcc.gov/cgb/sar.
Consumer Information on Wireless
Phones
The U.S. Food and Drug Administration (FDA)
has published a series of Questions and Answers
for consumers relating to radio frequency (RF)
exposure from wireless phones. The FDA
publication includes the following information:
Advertisement
Table of Contents
