Streaming Using Bluetooth - PURE Evoke C-D4 Manual

Streaming using Bluetooth

You can use Bluetooth to stream any audio from your phone or tablet to Evoke.
Pairing a mobile device with Evoke
Before you can stream audio to Evoke, you will need to pair your phone or tablet with Evoke.
Note: Bluetooth pairing varies on different mobile devices. See your phone or tablet manual for specific
information.
1. Press the Source button to switch to Bluetooth. Evoke will show 'Bluetooth discoverable' on the
display.
2. Enable Bluetooth on your mobile device.
3. On your mobile device, select the option to add a new Bluetooth device. On some mobile devices
you may need to select the search or scan option.
4. Start the pairing process on your mobile device. Do this by selecting 'Evoke C-D4' from the list of
available devices that appear on the your phone or tablet's screen. If your phone or tablet asks you to
enter a key, enter '0000'.
If Evoke has paired to your phone or tablet successfully, Evoke will display 'BT connected: (Bluetooth
device name)'.
Disconnecting a mobile device from Evoke
You can only have one phone or tablet connected to Evoke via Bluetooth at any one time. If your mobile
device goes out of Evoke's Bluetooth range (this is usually around 10m (30ft)) the mobile device's Bluetooth
connection is disconnected automatically. To manually disconnect your mobile device from Evoke, you will
need to disconnect from the Bluetooth settings page on your mobile device (see your mobile device's manual
for more information).
12