Icons In The Lcd Display's Status Bar - BenQ Siemens AP75a User Manual

Table of Contents

Advertisement

Icons in the LCD display's Status Bar

Icon
Function
Signal strength
Battery status
GPRS network
Message
WAP message
Voicemail
Line in use
Signal strength of the network. The more
bars indicated, the stronger the signal.
Shows the current level of battery power.
The more bars indicated, the more power
that remains. Four bars: fully charged. No
bars: immediate charging needed. When
charging the phone, the icon will scroll
through the bars until the battery is fully
charged.
GPRS services have been activated on your
SIM card.
Shows that an SMS/MMS message is being
received or that there are unread messages.
If the icon
that the message memory is full. For
information about the message function, see
page 37, "Messages".
You've got a WAP message (this icon will
only appear when there are no incoming or
unread SMS/MMS messages).
Indicates that you have voicemail messages
(this icon will only appear if the function is
supported by your network operator).
The alarm is turned on. To set the alarm, go
Alarm
to Tools > Alarm. See page 68.
Shows the number of the line currently in
use. To set the line, go to Settings > Call
Settings > Active Line. For details, see
page 88.
Description
appears in red, this indicates
Getting to Know Your Phone
9

Advertisement

Table of Contents
loading

Table of Contents