Rear View Connections - Sceptre U550CV-UMRD Manual

Rear View Connections

Line Out (3.5mm mini-jack) – This connection is for connecting to analog
1.
audio receivers. You can either use the 3.5mm mini-jack for connection or
purchase a 3.5mm mini-jack to female RCA conversion cable from any
electronic store to connect to your analog audio receiver.
SPDIF - This connection port is used for sending out digital audio signals to
2.
digital surround sound receivers. The black (optical SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital optical input.
3. AV – This connection port is for DVD players or satellite / cable set-top boxes
that use component or composite cables. Connect the yellow plug to the
green port, connect white for left channel audio, and red for right channel
audio. AV shares audio connections with YPbPr.
4. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component or composite cables. Connect green, blue, and
red for video, and then connect white for left channel audio, and red for right
channel audio. YPbPr shares audio connections with AV.
HDMI 3 (ver. 2.0) – HDMI 3 houses a HDMI version 2.0 connection. Under
5.
ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and
HDCP 2.2. This HDMI also supports CEC (consumer electronics control)
functions including audio return channel. HDMI connects to devices that use
HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top
box. This connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video device for
video. This HDMI also supports CEC (consumer electronics control) functions
(with audio return channel).
- 12 -
www.SCEPTRE.com
SCEPTRE UMRD Series User Manual