Sceptre U43 Manual page 14

Hide thumbs Also See for U43:
Table of Contents

Advertisement

function. HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
HDMI 1 (ver. 2.0 / MHL) – HDMI 1 houses a HDMI version 2.0 connection.
7.
Under ultra HD 4K x 2K resolution this connection supports 60 Hz refresh
rate and HDCP 2.2. This HDMI also supports CEC (consumer electronics
control) functions. HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal through
one single cable. This port also can accept a HDCP video device for video.
HDMI 1 also doubles as the MHL connection for cell phones. MHL is a
protocol where the display will display what your cell phone displays. If your
cell phone supports MHL you can purchase a MHL cable from any electronic
store and connect it to HDMI 1 and also your cell phone. Make sure the
display's source is changed to HDMI 1 and turn on your cell phone. You
should see an image of your cell phone screen. HDMI 1 also supports
ROKU™ MHL streaming stick. Plug the ROKU stick to HDMI 1, and switch
your source to HDMI 1. Afterwards use the purple colored buttons to access
ROKU functions. This HDMI also supports CEC (consumer electronics
control) functions.
TV – This connection is for digital or analog cable without the cable box or
8.
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
USB – USB connects to USB flash drives for playing music and picture. The
9.
USB port is also used for updating the display's firmware.
Please Note:
This display features a power saving function which will turn off the
display automatically after 10 minutes of idling on a connection with no
signal. This feature is present on all connection.
TV tuner is an optional item for this display.
SCEPTRE UMC Series UHD Display User Manual
- 14 -
www.SCEPTRE.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U seriesU50U55U65U550cv-umac

Table of Contents