Table of Contents
Advertisement
RF-RBWHP01_10-0652_MAN_V1.fm Page 23 Thursday, July 29, 2010 8:26 AM
• If the power cord is damaged, it must be repaired by a qualified
technician.
Troubleshooting
Check this list for a possible solution before calling for service.
Problem
No sound
Sound interference
No communication
between the
headphones and
docking station
Specifications
Solution
• Check the volume level of the headphones or audio sources connected to
the docking station.
• Make sure that all of the cables are connected correctly. Make sure that the
power indicators of the headphones and docking station are lit solidly. If
the indicators are blinking green, see "Establishing communication" on
page 18.
• Move the docking station slowly to find the best reception position for your
headphones.
• Shorten the distance between your headphones and the docking station.
The maximum distance is 115 feet (35 m).
• Make sure that the AC adapter is connected to the docking station.
• Make sure that the headphone batteries are installed correctly.
• Make sure the headphone batteries are charged.
The headphones and docking station power indicators turn on after the
headphone switch is set to ON and the POWER button on the docking station is
pressed.
• If they are lit solidly, a communication link has been successfully
established between the system.
• If they are blinking on one or both devices, see "Establishing
communication" on page 18.
Impedance
32 ohm
Headband
Auto-adjusting
Wireless type
2.4 GHz band
Distance
115 feet (35 m) line-of-sight
Speaker input power 20 mW nominal/ 30 mW maximum
23
RF-RBWHP01
Advertisement
Table of Contents
