Connecting Drain Hose - LG T1449TEFT1 Owner's Manual

30
C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump Model
1
Fit the end of the drain hose to the outlet of the
drain pump and tighten the clamp.
2
Put the other end of the drain hose over the standpipe or
wash tub.
NOTE
• To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose guide.
• The discharge height should be approximately 0.9 ~ 1.2 m from the floor.
Non-Pump Model
1
Before connecting
Ensure that the hose clip is set as indicated here.
2
Connect the Elbow Hose
Push the elbow hose toward the body of the
washing machine.
3
Place the Drain Hose
To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step 2.
Hose
Guide
0.9~1.2m
Clip
Drain Hose