Installing/Removing The Uim Card; Charging The Battery; Using The Function Menu - Huawei C208S Manual

Installing/Removing the UIM Card

If the phone is powered on, press and hold
the phone first and remove the battery. Then install/remove the
UIM card as shown in the following figure.

Charging the Battery

1. Connect the travel charger to the charger connector at the
bottom of your phone.
Make sure that the arrow on the charger connector faces the
front side of the phone.
2. Connect the charger to an AC power socket.
3. During the charging, the icon
of the screen is in an animated status.
4. When the charging icon is blinking, the phone is fully
charged.
5. Disconnect the charger from the AC power socket.
6. Press the gray buttons on both sides of the charger
connector to disconnect the charger from the phone.

Using the Function Menu

1. In the standby mode, press
2. Press
3. Press
to select a function menu.
to display the selected menu.
on the upper right corner
.
to power off
5