Declaration Of Rohs Compliance - Zte WP623N User Manual

No ring tone prompt for a
incoming call.
No display on screen when
disconnect external
supply.
Press CALL/REDIAL key, but no
number is sent.
Certain call cannot be received.
Cannot send short message.
Other abnormal phenomenon.

Declaration of RoHS Compliance

To minimize the environmental impact and take more responsibility to the earth we
live, this document shall serve as formal declaration that the ZTE WP623N
manufactured by ZTE CORPORATION are in compliance with the Directive
2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous
Substances) with respect to the following substances:
（1）Lead (Pb)
（2）Mercury (Hg)
（3）Cadmium (Cd)
（4）Hexavalent Chromium (Cr (VI))
（5）Polybrominated biphenyls (PBB's)
（6）Polybrominated diphenyl ethers (PBDE's)
The ZTE WP623N manufactured by ZTE CORPORATION, meet the requirements of
EU 2002/95/EC; however, some assemblies are customized to client specifications.
Addition of specialized, customer-specified materials or processes which do not meet
the requirements of EU 2002/95/EC may negate RoHS compliance of the assembly.
To guarantee compliance of the assembly, the need for compliant product must be
communicated to ZTE CORPORATION in written form.
This declaration is issued based on our current level of knowledge. Since
Check volume setting of ring tone.
Check whether the battery switch is turn to "|",
power whether the battery has electricity, or it is
damaged; or power on the phone again.
Check whether you have set Network Call
Bar.
Check whether the number is restricted to
come.
Check the network condition, or message
centre setting.
First refer to user manual, then check whether
the power is connected correctly or not, if
there are no problems, please power off and
re-start the phone again.
12