Adjusting The Brake Lever Free Play - Yamaha TW200T1 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
ver free play, turn the adjusting nut
in direction (b).
6. Tighten the locknut at the clutch le-
ver and the crankcase.
1
2
3
4
5
6
7
8
9
Adjusting the brake lever free
play
1 2
(b)
(a)
1. Locknut
2. Adjusting bolt
3. Brake lever free play
The brake lever free play should mea-
sure 5.0–8.0 mm (0.20–0.31 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
1. Loosen the locknut at the brake le-
ver.
2. To increase the brake lever free
play, turn the adjusting screw in di-
rection (a). To decrease the brake
lever free play, turn the adjusting
screw in direction (b).
6-21
3. Tighten the locknut.
EAU22092
WARNING
G After adjusting the brake lever
free play, check the free play
3
and make sure that the brake is
working properly.
G A soft or spongy feeling in the
brake lever can indicate the
presence of air in the hydraulic
system. If there is air in the hy-
draulic system, have a Yamaha
dealer bleed the system before
operating the motorcycle. Air in
the hydraulic system will dimin-
ish the braking performance,
which may result in loss of con-
trol and an accident.
EWA10630