NEC NP-PA1004UL-W User Manual page 177

PJLink Configure the settings for using PJLink.
NOTE:
• Do not forget your password. However, if you forget your password, consult
• What is PJLink?
• Setting of PJLink will not be affected even when [RESET] is done from the
AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the
network supported by AMX's NetLinx control system.
TIP:
• When using a device that supports AMX Device Discovery, all AMX NetLinx
[ON] will enable detecting the projector from AMX Device Discovery..
[OFF] will disable detecting the projector from AMX Device Discovery.
CRESTRON ROOMVIEW: Turn on or off when controlling the projector from your PC.
CRESTRON CONTROL: Turn on or off when controlling the projector from your
controller.
• CONTROLLER IP ADDRESS: Enter your IP address of CRESTRON SERVER.
• IP ID: Enter your IP ID of CRESTRON SERVER.
TIP:
• The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
Extron XTP Set for connecting this projector to the Extron XTP transmitter.
[ON] will enable to connect with the XTP transmitter.
[OFF] will disable to connect with the XTP transmitter.
PC CONTROL Set the PC control function to on or off.
[ON] will enable the PC control function.
[OFF] will disable the PC control function.
NEW Set the password.
PASSWORD,
CONFIRM
PASSWORD
CLASS To use functions with PJLink Class 2 specifications, set
[CLASS2].
DESTINATION When the [CLASS] is set to [CLASS2], input the IP address of
the destination.
with your dealer.
PJLink is a standardization of protocol used for controlling projectors of dif-
ferent manufacturers. This standard protocol is established by Japan Business
Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
menu.
control system will recognize the device and download the appropriate Device
Discovery Module from an AMX server.
For more information, visit http://www.crestron.com
147
5. Using On-Screen Menu
Up to 32 alphanumeric
characters
—
Up to 12 numeric
characters
—
—