Table of Contents
Advertisement
9.4 Switching off the
water softening
system
If you do not need to use the wa-
ter softening system, e.g. you al-
ready have a whole house water
softening system, you can turn the
system off.
Note
To avoid damage to the
appliance, only switch off the
water softening system in the
following cases:
¡ The water hardness is max.
26 °E and you are using com-
bined detergents with salt re-
placement substances. Accord-
ing to manufacturers, combined
detergents with salt replace-
ment substances can generally
only be used up to a water
hardness of 26 °E without
adding special salt.
¡ The water hardness is 0 - 8 °E.
You can omit special salt.
Press
1.
To open the basic settings,
2.
press
a The display shows Hxx.
a The display shows
Press
repeatedly until the
3.
display shows H00.
To save the settings, press
4.
for 3 seconds.
a The water softening system is
switched off and the salt refill
indicator is deactivated.
.
for 3 seconds.
.
Rinse aid system en-us
10 Rinse aid system
Rinse aid system
You can use the rinse aid system
Rinse aid system
and rinse aid to get dishware and
glasses rinsed perfectly without
spots.
10.1 Rinse aid
For optimum drying results, use
rinse aid.
Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
lift
.
Add rinse aid up to the max
2.
mark.
If rinse aid spills out, remove it
3.
from the tub.
and
2
1
max
23
Advertisement
Table of Contents
