D-Link DWL-G650M Manual page 11

DWL-G650M User's Manual
Setting up a Wireless Ad-Hoc Network
For a typical wireless setup at home (as shown above), please do the following:
1
2
3
When assigning IP addresses to the computers on the network, please remember that
the IP address for each computer must be in the same IP address range as all the
computers in the network, and the subnet mask must be exactly the same for all the
computers in the network.
For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet
mask of 255.255.255.0, then the second computer can be assigned an IP address of
192.168.0.3 with a subnet mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP address, one
or more of the devices may not be visible on the
D-Link Systems, Inc.
1
Install the D-Link DWL-G650M 108G MIMO Wireless Notebook adapter
into the laptop computer. (See the Quick Installation Guide included with
the product.)
Install the D-Link DWL-G650M 108G MIMO Wireless Notebook adapter
into the laptop computer. (See the Quick Installation Guide included with
the product.)
Set the wireless configuration for the adapters to Ad-Hoc mode, set the
adapters to the same channel, and assign an IP address to each computer
on the Ad-Hoc network.
DWL-G650M
108G MIMO Wireless
Notebook Adapter
IP Address
Ad Hoc Network
2
network.
11