Kenwood TK-260 Instruction Manual page 15

1 ANTENNA connector
Connect the supplied antenna to this connector.
2 LED indicator
Lights red while transmitting. Flashes red while
transmitting if the battery pack voltage is low.
Recharge or replace the battery pack at this time.
The LED lights green while receiving a station. The
LED flashes orange if, while a channel programmed
with 2-Tone signaling is selected, the same 2-Tone
signaling is received as is programmed or you press
and release the [PTT] switch. Press the [MONI] button
to cancel the flashing state. The flashing indication
only functions if your dealer activates the 2-Tone
function on your transceiver.
3 CHANNEL selector
Turn clockwise or counterclockwise to select your
desired channel from a maximum of 4 channels.
4 POWER/VOL control
Turn clockwise to switch ON the transceiver. Turn
counterclockwise fully to switch OFF the transceiver.
Also adjusts the volume level.
5 PTT (Push-to-Talk) switch
Press and speak into the microphone to call another
station.
9