The OSD Controls
After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST
SIDE ANGLES and follow the directions.
Smart Help
...to exit completely, press the
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then
press the
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when
the picture is not square.
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until ADJUST SHAPE is highlighted.
3) Press the
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be
file:///D|/EDFU/crt_19_6/edoc/english/osd/osd_cont.htm (14 of 37)2005-08-10 ¤U¤È 01:05:50
button, and follow steps 7 - 9.
button twice.