Picture Is Scrambled; Display Colors Are Wrong - Gateway EV Series Manual

Picture is scrambled

If your picture is scrambled or does not look right, you can reset your monitor
to its default video mode and resolution settings. See the "Video modes"
section in this guide for more information.
To reset your monitor to its default settings:
1 Start the system.
2 Press C
3 Select
Windows 98™ starts in a "safe mode," which means that most drivers
are not loaded.
4 Click
Start,
window opens.
5 Double-click the
6 Click the
7 Click
Advanced
8 Click the
9 Click
Change
10 Select
instructions.
11 Restart Windows.

Display colors are wrong

Check the video connector and the end of the video cable for any pins
that might be bent or pushed in.
Make sure the video cable is securely connected to the back of the
monitor and to the back of the computer.
Make sure that the video cable is not damaged.
Restart the system (leaving the monitor on).
.
TRL
and wait for the system to finish starting up.
Safe mode
then select
Settings
icon. The Display Properties window opens.
Display
tab.
Settings
. The Advanced Display Properties window opens.
tab.
Monitor
. The Select Device window opens.
Plug and Play monitor (VESA DDC)
, then
Control Panel
by following the on-screen
Troubleshooting
. The Control Panel
13