Table of Contents
Advertisement
Call functions
Using the speakerphone feature
Use your phone as a speaker phone to talk and
listen with the phone a short distance away.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press [Centre] again to
switch back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
•
Speaker on/Normal: turn on the speakerphone
feature or switch back to Normal mode.
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit or back to the phone.
•
Conference call: set up a multi-party call by
adding a caller on hold to a currently active call.
You can include up to 5 people on a multi-party
call.
•
Private call: have a private conversation with
one multi-party call participant. The other
participants can converse with each other. After
the private conversation, select Conference call
to return both all private participants to the
multi-party call.
•
Swap: switch between calls, if a call is on hold.
•
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
28
p. 71
•
Hold/Retrieve: place a call on hold or retrieve
the call.
•
Mute: access the following muting options:
Voice: switch off the phone's microphone so
that the other person on the phone cannot hear
you, or switch it back on.
Keypad tones: turn the key tones off or on.
To communicate with answering machines or
computerised telephone systems, Keypad
tones must be selected.
•
New call: make a new voice call.
•
Create message: create a new SMS message.
•
Contacts: locate or store contacts in Contacts.
•
Add to Contacts: add the sender's number to
Contacts.
•
View contact details: access the contact
information, if the caller is saved in Contacts.
•
Send DTMF: send DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
•
Memo: create a memo.
•
End call/End: disconnect the call currently on
hold, active call, or all calls.
Advertisement
Table of Contents
