Table of Contents
Advertisement
INSTALLATION INSTRUCTION
24
Installer Setting - Remote Controller Master/Slave Setup
It is a function for settings in group control, or 2-remote controller control.
Remote controller
Indoor unit operates based on master remote controller at group control.
Master
(Master is set when delivering from the warehouse.)
Setup all remote controllers except one master remote controller to slave
Slave
at group control
* Refer to the 'group control' part for details
- When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
When pressing the
1
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting
mode, select the ceiling height setting code
value by pressing the oper-mode button.
* Remote controller master/slave setting
code value : 07
Select the desired setting value with the
2
temperature up(
When pressing the
3
established static pressure value will be
set up.
When pressing the
4
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be released.
- If there isn't any button input for more than
25 seconds, the installer setting mode will
also be released.
Function
button and
), down(
) button.
*Setting value
00:Slave
01:Master
Code value
Value
button, currently
button and
Advertisement
Table of Contents
