If the electric cable is damaged, it should ing children) with reduced physical, sensory or mental be replaced by RYOBI authorized distributor. capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern- ing use of the appliance by a person responsible for their safety.
Switch off the machine. Wait 5 ~ 10 minutes 10. Connect the machine to power supplies. before using the device again. Try to determine the cause of the fault. If the problem repeats itself, please contact RYOBI service centre.
• Clean the connectors of dust and sand. • Rinse the detergent spraying attachment after use. To reduce the risk of injury, user must keep all Any repair should always be made by RYOBI authorized bystanders at least 15m away. distributor with genuine spare parts.
Troubleshooting Fault Cause Remedy The machine does not run when the The plug is damaged. Check the plug and fuses to see if they ON/OFF switch and spray handle lever There is insufficient voltage. are okay. are pressed. The pump is locked. Manually turn over the motor.
Page 8
RYOBI tool (hereinafter called “the Product”), for which it was not designed, or is not suited is warranted by Ryobi (herein called “the and no repairs, alterations or modifications Company”) to be free from defects in material...