Preparing The Parts - Samsung SDS SHS-3320 User Manual

Preparing the parts

|
1. Adjusting the length of the dead bolt
2. Changing the faceplate of the dead bolt
Change the faceplate of the dead bolt following the size of a strike hole.
OR
Rectangle Strike hole
: No need to change.
3. Adjusting the length of the tailpiece
��� Tailpiece drawing
35mm
Turn the body of the dead bolt to adjust the length
of the dead bolt.
It can be 60mm (2-3/8") or 70mm (2-3/4")
OR
35 40 45 50 55

SHS-3320/3321
Samsung SDS
Digital Door Lock
OR
Round Strike hole
1. Remove the strike
2. Insert the round
How to cut
1. Press the V-cut line with pincers to make
more cut line.
2. Hold the end of the tailpiece with pincers.
3. Bend it up and down until it is separated.
- For more information, refer to page 31.
faceplate.(PULL)
faceplate.