Page 1
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Page 2
Thank you for choosing ViewSonic With over 25 years as a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive), and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance...
Do not place heavy objects on the display, video cable, or power cord. If smoke, an abnormal noise, or a strange odor is present, immediately switch the display off and call your dealer or ViewSonic. It is dangerous to continue using the display.
Page 6
20. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use caution when moving the cart/equipment combination to avoid injury from tipping over. 21. Unplug this equipment when it will be unused for long periods of time. 22.
Contents Compliance Information FCC Compliance Statement ...................i Industry Canada Statement ..................i CE Conformity for European Countries ..............i Declaration of RoHS2 Compliance ................ii Indian Restriction of Hazardous Substances............ii Cautions and Warnings ..................iii Copyright Information Product Registration ....................2 For Your Records ....................2 Getting Started Package Contents ....................3 Quick Installation ....................4...
® NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Product Registration To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on ViewSonic’s website to register your product online. Registering your product will best prepare you for future customer service needs.
• The word “Windows” in this user guide refers to the Microsoft Windows operating system. • Visit the “Download” section of the monitor product page on the ViewSonic website to download your monitor drivers. • Don’t forget to register your ViewSonic monitor! Simply login to the ViewSonic website in your region and click on the “Support”...
NOTE: Windows users may receive a message asking them to install the INF file. To download the file, visit the “Download” section of the monitor product page on the ViewSonic website. 4. Windows users: Set the timing mode (example: 1024 x 768) For instructions on changing the resolution and refresh rate, see the graphics card’s user guide.
NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load: 9.9kg. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic ® your local dealer. Refer to the instructions that come with the base mounting kit.
Using the Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image.
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the on-screen OSD control settings. Standby Power On/Off Power light Blue = ON Amber = Power Saving Displays the Main Menu or exits the control screen and saves adjustments.
(white level). Information displays the timing mode (video signal input) coming from the graphics card in the computer, the display model number, the serial number, and the ViewSonic website URL. See your graphics card’s user guide ® for instructions on changing the resolution and refresh rate (vertical frequency).
Page 16
Input Select toggles between inputs if you have more than one computer connected to the display. Manual Image Adjust displays the Manual Image Adjust menu. You can manually set a variety of image quality adjustments. Memory Recall returns screen settings back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications section of this user guide.
Short Cuts Function from the button(s) Main Menu Input toggle [▼] To immediately activate Blue Light Filter [▲] To immediately activate View Mode [▼] + [▲] 1. Recall Contrast or Brightness to default in its menu with- out OSD message 2.
Page 18
[▼] Color Space Mode (keep pushing [▼] for 5 sec) (Keep pushing 5 sec) Switch color space mode between AUTO / RGB (0-255) / RGB (16-235) / YCC (0-255) / YCC (16-235) 1. For digital port HDMI only, not including DP. 2.
[1] + [2] Toggle timings Default timing 720 x 400 @70Hz 720 x 400 @70Hz 640 x 350 @70Hz (H=31.5K, V=70Hz) 640 x 400 @70Hz 640 x 480 @60Hz, 640 x 480 @60Hz 640 x 400 @60Hz, (H=31.5K, V=60Hz) 720 x 480 @60Hz 1280 x 768 @50Hz, 1280 x 768 @50Hz 1024 x 768 @50Hz...
Other Information Specifications Display Type TFT (Thin Film Transistor), Active Matrix 1920 x 1080 Display, 0.24825 mm pixel pitch Display Size Metric: 54.6 cm Imperial: 22” (21.5” viewable) Color Filter RGB vertical stripe Glass Surface Anti-Glare Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) HDMI (TMDS digital, 100ohms) DisplayPort...
® cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcoholbased cleaners.
Loose or broken pins in the cable connector could cause an improper connection. • Connect the display to another computer. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. ®...
For technical support or product service, see the table below or contact your reseller. NOTE: You will need to provide the product serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ www.viewsonic.com.cn www.viewsonic.com/hk/ 中国 (China) 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/...
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Page 25
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Page 27
Tel: (52) 999-925-1916 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 14035 Pipeline Ave. Chino, CA 91710, USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com...