Canon LEGRIA HF R806 Instruction Manual page 250

Trouble?
e Wi-Fi Functions
Refer also to the instruction manual of the access point and other
devices you will use.
Cannot connect with the access point.
- Check that the access point is working correctly.
- The effective communication range between the camcorder and
access point may vary depending on the strength of the wireless
signal. Try using the camcorder closer to the access point.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
- Wi-Fi networks with a stealth function that do not broadcast their
network name (SSID) will not be detected by the camcorder during
the Wi-Fi network setup. Perform the setup manually (A 200) or
turn off the stealth function of the access point.
The wireless connection was interrupted while transferring files.
- Incomplete files may remain at the transfer destination. If incom-
plete files remain at the transfer destination, check the content and
make sure they are safe to delete before deleting them.
- Select [New Files] and perform the file transfer again.
Cannot complete a wireless connection to the camcorder.
- Resetting the camcorder's settings using 1
All] will reset the camcorder's network name and passwords. Erase
the camcorder's previous network settings from the iOS or Android
device and connect the device to the camcorder again.
250
> q >
[Reset