D-Link DWR-961 User Manual page 31

Section 4 - Configuration
This page displays a list of currently-connected wireless clients, and their
respective MAC addresses.
This page lets you set up your wireless network and choose a wireless security mode. Click Apply to save your settings, or Refresh to revert to your
previous settings.
Enable Wireless: Check this box to enable wireless access. When you enable this
option, the following parameters take effect.
Wireless Also known as the SSID (Service Set Identifier), this is the name of
Network Name: your Wireless Local Area Network (WLAN). Enter a name using up
to 32 alphanumeric characters. The SSID is case-sensitive.
802.11 Mode: Select the IEEE 802.11 standard used by your wireless clients.
Enable Auto Enabling this feature will allow the router to automatically scan for
Channel Scan: the best wireless channel to use.
Wireless If Auto Channel Scan is disabled, select the desired channel here.
Channel:
D-Link DWR-9 User Manual
Wi-Fi
Device List
Wi-Fi Settings
33