Canon GX7020 Online Manual page 462

◦ Image data edited or processed on a computer must be printed from the computer.
Note
When a photo which has been processed on a computer is selected, "?" is displayed on the
printer's touch screen.
• Cannot connect to the server. Please wait a while and try again.
The printer cannot connect to the server due to a communication error.
Select OK on the printer's touch screen to cancel the error and try again after a while.
• Check the page size and tap [OK].
The size of the loaded paper is different from the paper size set in Page size in Fax paper settings.
Select OK on the printer's touch screen to cancel the error.
Select Function list in FAX, check Page size, Type and Paper src in Fax paper settings, and then
reload the paper accordingly.
• Unsent/received document data has been lost because the power cord was unplugged.
A power failure has occurred or the power cord has been unplugged when the faxes are stored in the
printer's memory.
Select OK on the printer's touch screen to cancel the error.
The list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed.
For details, refer to Summary of Reports and Lists.
See Unplugging the Printer
Important
• If a power failure occurs or you unplug the power cord, all the faxes stored in the printer's
memory are deleted.
• Replace the receiver.
The handset is not placed in the handset cradle correctly.
Replace the handset correctly.
Note
• See A Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the fax
standby screen.
Error Regarding Automatic Duplex Printing Is Displayed
See Automatic Duplex Printing Problems and take the appropriate action.
Check
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
The printer may have been unplugged while it was on.
Check the error message that appears on the computer and click OK.
to unplug the printer correctly.
462