Panasonic PT-DX810E Operating Instructions Manual page 80

[S-VIDEO]
[DVI-D]
[HDMI]
[RS-232C]
Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal.
To set the communication condition of the <SERIAL IN> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [(IN) BAUDRATE].
r [(IN) BAUDRATE]
[9600]
[19200]
[38400]
r [(IN) PARITY]
[NONE]
[EVEN]
[ODD]
To set the communication condition of the <SERIAL OUT> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [(OUT) BAUDRATE].
r [(OUT) BAUDRATE]
[9600]
[19200]
[38400]
r [(OUT) PARITY]
[NONE]
[EVEN]
[ODD]
To set the response
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [RESPONSE(ID ALL)].
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Sets the input to be projected when the projector is switched on to S-VIDEO.
Sets the input to be projected when the projector is switched on to DVI-D.
Sets the input to be projected when the projector is switched on to HDMI.
Select the proper speed.
Select the parity condition.
Select the proper speed.
Select the parity condition.
4)
Press qw to switch [(IN) BAUDRATE].
f The setting will change among [9600], [19200], and [38400]
each time you press the button.
5)
Press as to select [(IN) PARITY].
6)
Press qw to switch [(IN) PARITY].
f The setting will change among [NONE], [EVEN], and [ODD]
each time you press the button.
4)
Press qw to switch [(OUT) BAUDRATE].
f The setting will change among [9600], [19200], and [38400]
each time you press the button.
5)
Press as to select [(OUT) PARITY].
6)
Press qw to switch [(OUT) PARITY].
f The setting will change among [NONE], [EVEN], and [ODD]
each time you press the button.
4)
Press qw to switch [RESPONSE(ID ALL)].
f The setting will change between [ON] and [OFF] each time you
press the button.
5)
Press as to select [GROUP].