BenQ MW855UST User Manual page 57

FUNCTION
Operation
Setting
Panel Key Lock
Background
Color
Splash Screen
PointWrite
Touch Module
Operation
DESCRIPTION
Direct Power On
Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See "Setting Auto Power Off" on page 63
Quick Cooling
Enables or disables the Quick Cooling function.
Selecting On enables the function and the projector cooling time
will be shortened from a normal 90 second duration to
approximately 2 seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Instant Restart
Selecting On enables you to restart the projector immediately
within 90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
on page 43 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Disables or enables all panel key functions except
the projector and keys on the remote control. See
keys" on page 44 for details.
Selects background appearance when there is no signal.
Allows you to select which logo screen will appear during projector
start-up.
Disable or enables "Type A connector" 5V power output for
PointWrite Touch Module.
for details.
"Hiding the image"
POWER on
"Locking control
57