Gigabyte GA-Z87M-D3HP User Manual page 43

& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU/System Temperature Warning
Sets the warning threshold for CPU/system temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
& CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the CPU temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the fan speed. This item is configurable only when CPU Fan Speed Control is set
to Manual. Options are: 0.75 PWM value /
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the fan speed. This item is configurable only when 1st System Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
& 2nd/3rd System Fan Speed Control (SYS_FAN2/ SYS_FAN3 Connectors)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the fan speed. This item is configurable only when 2nd/3rd System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
C/140
o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value /
o
- 43 -
F, 70 C/158 F, 80 C/176 F,
o o o o o
C.
o
BIOS Setup