Table of Contents
Advertisement
3
Slide the clamper unit to the base of the power cord.
The position of the clamper unit can be adjusted by pulling the tab in the direction of the arrow.
After adjusting the position of the clamper unit, release the tab to fix the clamper unit in place.
knob
4
Pull the band to fasten the power cord.
The position of the band can be adjusted by pulling the tab in the direction of the arrow.
Pull the upper and lower sections of the band in a well-balanced manner.
After adjusting the position of the band, release the tab to fix the band in place.
knob
This completes the attachment of the power cable stopper.
knob
2. Installation and Connection
29
Advertisement
Table of Contents
