JVC LT-37DV1BJ Instructions Manual page 6

Microphone (See P. 17)
Remote control sensor
Eco sensor (See P. 47)
The power lamp will blink for a while when you turn the main power switch

on or insert the plug into an AC outlet. This is not a malfunction.
The power lamp will blink every time the TV receives a signal from the

remote or when a TV picks up a clapping sound.
When you turn on the TV, the Power lamp will blink until you get a picture

on the TV and the Power lamp will stay lit. When the Power lamp is
blinking the TV will not be able to receive any commands.
When "Power Lamp" is set to "Off", the Power lamp will not light up.

For details, refer to "Power Lamp" (P. 35)
Note
Peel off the protection films pasted on the TV stand after the TV has been

placed properly.
Power lamp
ON: Lit
OFF: Unlit
Touch sensor panel operation
TV/AV MENU P
Change channel / page
Display on-screen menu
Switch between TV / AV devices
Touch on the function name to operate the function

/OK
Setting up your TV
/OK
Volume
Power On / Off (standby)
You will hear a beep if you have

touched the button correctly.