Table of Contents
Advertisement
6
Setup and Reset
6.1.3 Eco Icon Display
Configuring Eco Icon Display
1
Press any button on the front of the product to display the Function Key Guide. Next, press [
display the corresponding menu screen.
2
Press [
3
Press [
4
Press [
The following screen will appear.
Off: Disable the Eco Icon Display function.
On: Display the operation status of the Eco sensor as a pop-up guide.
5
Press [
6
The selected option will be applied.
Notes
If the screen brightness is adjusted according to the ambient light intensity when the
Eco Light Sensor
brightness.
If the screen becomes brighter as the ambient light becomes brighter, the brightness slide bar level
will increase with a sun image displayed. If the screen becomes darker, the brightness slide bar level
will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds
after the sensor activates.
On Check/No Signal status, Warning OSD is not worked
] to move to
Settings
and press [
] to move to
ECO
and press [
] to move to
Eco Icon Display
ECO
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Eco Icon Display
] to move to the option you want and press [
Eco Light Sensor Activated
is on, a pop-up as shown above will appear showing the adjusting screen
] on the product.
] on the product.
and press [
] on the product.
Select the ECO Icon
Off
mode.
Off
Off
On
].
Eco Light Sensor Activated
] to
75
6 Setup and Reset
Advertisement
Table of Contents
