Gigabyte GA-X150-PLUS WS User Manual page 19

16) TPM (Trusted Platform Module Header)
You may connect a TPM (Trusted Platform Module) to this header.
19
20
17) THB_C (Thunderbolt
This connector is for a GIGABYTE Thunderbolt
1
18) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Open: Normal
Short: Clear CMOS Values
• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually
configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
Pin No. Definition
1
1 LCLK
GND
2
LFRAME
3
2
4 No Pin
LRESET
5
6 NC
LAD3
7
LAD2
8
9 VCC3
LAD1
10
Add-in Card Connector)
™
add-in card.
™
Pin No. Definition
1 GPIOA
2 GPIOB
3 N_-SLP_S3
4 N_-S4_S5
GND
5
- 19 -
Pin No. Definition
LAD0
11
GND
12
13 NC
14 NC
15 SB3V
SERIRQ
16
GND
17
18 NC
19 NC
20 SUSCLK
Supports a Thunderbolt add-in card.
™