Table of Contents
Advertisement
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below
can be performed. Select an item using the ▲/▼ cursor
buttons, and press the ► cursor button or the E NTE R
button to execute the item. Then perform it according to
the following table.
It e m
V O L UM E
S PE A K E R
A UD IO
S O UR C E
5 2
Using the ◄/► buttons adjusts the volume of the audio output.
Low ó High
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON ó OFF
When OFF is selected, the built-in speaker does not work.
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the A UD IO
this projector. However, the built-in speaker does not work when
SPEAKER is set to OFF.
(1) Choose a picture input port using the ▲/▼ buttons.
(2) Select an audio input port or the mute icon using the ◄/► buttons.
The icons indicate the following;
No.1: A UD IO
IN1 port
No.3: A UD IO
IN3 port
No.5: H D M I 2 / M H L port
: mutes the sound
• C.C. (Closed Caption) is automatically activated when
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for V I D E O or 480i@60 for
C O M PUT E R IN 1 or C O M PUT E R IN 2 , and when AUTO is selected
for DISPLAY in the C.C. menu under the SCREEN menu (58).
• For the setting of AUDIO OUT, refer to AUDIO OUT of STANDBY
OUTPUT in the SETUP menu.
D e s c r i p t i o n
O UT port and built-in speaker of
No.2: A UD IO
IN2 port
No.4: H D M I 1 port
No.6: L A N port
is selected
Advertisement
Table of Contents
