Panasonic HC-V750 Operating Instructions Manual page 37

[QUICK START]
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 50% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
/
≥ HC-W850 HC-V750
Quick Start will not work if there is no SD card inserted.
HC-W850M HC-V750M
/
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1 Select the menu.
: [SETUP] # [QUICK START] # [ON]
MENU
2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put into
recording pause.
≥ About 5 minutes have passed, the Quick Start Standby Mode is cancelled, and the unit is turned
off.
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(l 36)/[ECONOMY (AC)]
≥ Turn the unit off using the power button.
/
HC-V730
(l 36), close the LCD monitor once and open it again.
- 37 -

