Using Rear Projection - Epson EMP-3300 Owner's Manual

Using Rear Projection

The projector can be set up for front or rear projection. In rear projection, the
projector is on the opposite side of the screen from the audience, as shown here:
For rear projection, you must turn on the Rear setting in the Display menu. This
setting flips the image from left to right for correct viewing. See Chapter 3 for
information about the menus.
Because the screen is between the remote control and the projector for rear
projection, you need the optional lead wire to use the remote control. See
Chapter 1 for more information. If you don't have the lead wire, use the buttons
on the operation panel to make changes to the menus.
28 2 • Using the Projector