Installation
Ventilation Requirements
Ensure that the below air gaps are followed
●
The clearance between the top of the refrigerator and the
ceiling is at least 3.6 cm.
●
The clearance between the wall and the rear of the refrigerator
is at least 5 cm.
●
The clearance from the side of the refrigerator and the wall is
at least 3 cm.
Area Around the Installed Unit
●
Do not
locate the refrigerator in a humid place as rust may
form and may cause electrical leakage.
●
Do not
locate the refrigerator in an area that exposes it to
direct sunlight.
●
Do not
locate the refrigerator near any heat generating source
such as a cook top, dishwasher or oven.
●
The refrigerator must be located in a place that ensures there
is good air circulation around the refrigerator.
●
If the refrigerator is placed on an uneven surface, use the
adjustable feet to ensure the refrigerator stands level.
Moving or shifting
●
When moving or shifting the refrigerator, remove the ice twister, top freezer case, water evaporator
pan etc. and check to be sure there is no water in the refrigerator.
●
When the refrigerator has been moved to the location, turn the adjustable front feet to ensure that
the refrigerator is stable.
●
If the unit cannot be transported upright, please contact the customer care center for further
guidance. Transporting the unit on the incorrect side may cause damage to the refrigerator.
Power Cord
●
To extract the power cord from the unit for use, remove the water evaporator pan, extract the
power cord and reinsert the water evaporator pan.
LED lamp and Grounding
●
The refrigerator LED lamp is designed specifi cally for this product. If replacement is required,
please contact your dealer or authorised service agent.
●
This appliance must be properly grounded.
AK-156531_EN.indd 5
AK-156531_EN.indd 5
5 cm
3 cm
5
5/2/12 4:05:28 PM
5/2/12 4:05:28 PM