Alamo GREATWHITE 7600A Operator's Manual page 50

WARNING!
When attaching the Implement input driveline to the Tractor PTO, it is
important that the connecting yoke spring activated locking collar
slides freely and the locking balls are seated securely in the groove on
the Tractor PTO shaft. A driveline not attached correctly to the Tractor
PTO shaft could come loose and result in personal injury and damage
to the Implement.
Ensure fans are in good working condition and rotate
freely.
Ensure chute ring is rotating freely
Ensure the driveline integral shields are in good
condition and rotate freely.
Inspect that all bolts and screws are in position
and are properly torqued.
DANGER!
Do not put hands or feet near the rotating fan. Fan contact can result in
serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material, performing
service, and making repairs.
DANGER!
Do Not put hands or feet near the rotating auger. Auger contact can result
in serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material, performing
service, and making repairs.
Ensure the drive chain shield is in place and in
good repair.
Ensure the tractor PTO master shield is in place,
lowered and in good condition.
Inspect that the chute cable is not excessively
frayed or worn out.
Inspect the condition of the drive chain. Retighten
if slack exceeds 3/4".
7600A 06/05
© 2005 Alamo Group Inc.
OPERATION
(S3PT-17)
Fans
(SSB-6)
(SSB-5)
Cable Chute
Operation Section 4-14
Chute Rings