Table of Contents
Advertisement
Control Panel (Applicable to some models only)
Control Panel Features
Fridge Temperature
Indicates the set target temperature of the fridge
compartment in Celsius (°C).
The recommended Fridge set temperature in
normal ambient conditions and loads is 3°C ~ 4°C.
Freezer Temperature
Indicates the set target temperature of the freezer
compartment in Celsius (°C).
The recommended Freezer set temperature
in normal ambient conditions and loads is
-17°C ~ -19 °C.
NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the fridge. The actual fridge temperature
depends on the food inside the fridge as well as
ambient temperatures and how often the doors
are opened and closed.
Pure N Fresh
When the Replace lamp is on, replace the Pure N
Fresh filter.
y When the "Replace" lamp is turned on,
replace the filter to maintain the performance
of the Pure N Fresh Filter function.
y To replace the filter, press the
on the touch control panel to the OFF mode
so that the filter icon is not illuminated and
the blue Pure N Fresh LED inside the fridge
remains off. The Pure N Fresh function
has three modes, Auto(when icon is lit
up), Power(when icon and Power are lit
up) and Off(when icon is not lit up). Power
mode can be engaged by pressing the
Pure N Fresh touch control respectively.
Auto>Power>Off>Auto....
Power mode will resume back to Auto mode
after 4 hours.
Express Freeze
This function increases both ice making and
freezing capabilities.
y When you touch the Express Freeze button,
the graphic will illuminate in the display and
will continue for 3 hours. The function will
automatically disable itself after 3 hours.
y You can stop this function manually by touching
the button one more time.
Wi-Fi
The Wi-Fi button, when used with the LG Smart
ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network.
The Wi-Fi icon shows the status of the
refrigerator's network connection. The icon
illuminates when the refrigerator is connected to
the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to
connect to the network. The icon blinks while the
connection is being made, then turns on once the
connection is successfully made.
HOW TO USE
21
button
Advertisement
Table of Contents
