D-Link DIR-867 User Manual page 37

Section 4 - Configuration
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you
manually select another IPv6 connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS If you selected Use the following DNS address above, enter the
Server: primary DNS server address.
If you selected Use the following DNS address above, enter the
Secondary DNS
Server: secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable DHCP Prefix Delegation.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
Enter a valid LAN IPv6 address.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-867 User Manual
Auto Detection
33