Charging Battery; Installing Memory Card; Transferring Files; Turning On/Off The Device - Nextbook M1010FP Manual

Table of Contents

Advertisement

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor. It takes about 5 hours to fully charge the battery. The
charge indicator should light red during charging, and should light green as the battery
is fully charged.
Note:
a.
You are strongly recommended to charge the battery immediately when the device indicates the battery
is lower than 15%!
b.
For extended battery life, it is suggested NOT to use the device when it is charging.
c.
For maximum performance, lithium-ion batteries need to be used often. If you don't use the device
often, be sure to recharge the battery at least once per month.
d.
Be sure to use only the dedicated power adaptor provided with the unit for charging.

Installing Memory Card

This device can read files directly from memory card.
To use a memory card, find the card slot on the device and then insert the memory
card into the slot in the correct orientation. To access the files stored in the memory
card, enter the Explorer/ASTRO mode by tapping the Explorer /ASTRO icon and
select the "SD Card" directory.

Transferring Files

Before reading or playing files, you may need to transfer media files from a computer
to the device.
(1) Connect the device to a computer with the supplied USB cable. Two removable
disks will be added to the computer, respectively referring to the internal flash
memory and the SD card.
(2) Once the connection is done, turn on the USB storage.
(3) Open a removable disk, then copy files from the PC to it.
Note:
Since pre-installed applications and Android OS occupies a considerable part of capacity – about 2.0GB, it
is normal that you see huge difference between available memory space and total capacity.

Turning On/Off the Device

To turn on the device, press and hold the Power button on the unit before you see the
boot-up screen then release. It may take one or two minutes to start up the system,
please be patient before you proceed.
6

Advertisement

Table of Contents
loading

Table of Contents