Using The Projector; Connecting The Antenna Or Cable - LG CineBeam HU80KS Owner's Manual

46

USING THE PROJECTOR

Connecting the Antenna or Cable

To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog, digital) TV. (The RF cable is sold
separately.)
•
Make sure not to bend the copper wire of the
RF cable (75 Ω). Turn the input jack to the right
to fasten it.
• Ensure you use a standard coaxial cable (75
Ω, sold separately) when connecting to the
projector input.
•
For better image quality in locations where signal
strength is low, purchase and install a signal
amplifier (booster).
•
A signal splitter is required if you want to use two or more projectors
through one antenna.
•
If you have any problems when installing the antenna, please consult a
suitable retailer or the store where you purchased the antenna.
Copper wire