Table 6: Foot Screws, Number Of Cup Springs - ABB A170-M62 Operation Manual
Hide thumbs
Also See for A170-M62:
- Operation manual (150 pages) ,
- Operation instruction manual (148 pages) ,
- Operation manual (148 pages)
Table of Contents
Advertisement
Operation Manual / 4 Product description / A100-M axial
2 Removal and installation / 2.3 Installing the turbocharger
Product
Number of cup springs X
A175-M
11
Table 6: Foot screws, number of cup springs
Holes b1/b2 are needed to achieve the required clamping length. An additional drill hole is
not needed at the higher turbine-end foot side (01).
© Copyright 2019 ABB. All rights reserved.
HZTL4033_EN
Rev.D
December 2019
Advertisement
Chapters
Table of Contents
