Table of Contents
Advertisement
[SINGLE/DUAL]
*2
[DUAL/DUAL]
*2
[QUAD]
*2
*1 This can be selected when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in either of the slots.
*2 This can be selected when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in both of the slots.
5)
Press the <ENTER> button.
Note
f [HDMI LINK] is fixed to [SINGLE] in the following cases.
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to anything other than [OFF]
g When the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen display
f The [HDMI LINK] setting cannot be changed when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT
MODE] is set as the combination used for the HDMI input of the Interface Board.
f The content set is displayed in [HDMI LINK SETTINGS].
r Structure of the projected image
The single link is a setting to display one image with one input signal. The dual link is a setting to display one
image with two input signals. The quad link is a setting to display one image with four input signals.
Single link
Setting [SIGNAL LEVEL] in [SLOT IN] (HDMI input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [SIGNAL LEVEL].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The HDMI signal level is displayed for 30 bits of input.
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets the HDMI1 input and the HDMI2 input to single link, and the HDMI3 input and the HDMI4 input
to dual link.
Sets the HDMI1 input and the HDMI2 input to dual link, and the HDMI3 input and the HDMI4 input to
dual link.
Sets the HDMI1 input, the HDMI2 input, the HDMI3 input, and the HDMI4 input to quad link.
HDMI1/
HDMI3
Dual link
Automatically sets the signal level.
Select this item when the HDMI terminal output of the external device (such as Blu-ray disc player)
is input to the <HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, or the
<HDMI IN 4> terminal.
Select this item when the DVI-D terminal output from the external device (such as computer) is input
to the <HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, or the <HDMI IN
4> terminal via a conversion cable, etc.
This is the same when the HDMI terminal output from a device such as a computer is input to the
<HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, and the <HDMI IN 4>
terminal.
HDMI2/
HDMI4
HDMI1
HDMI2
HDMI3
HDMI4
Quad link
ENGLISH - 123
Advertisement
Table of Contents
