Listening To The Fm Radio; Tuning To An Fm Radio Station; Programming Radio Stations; Tuning To A Preset Radio Station - Pioneer X-EM26 Operating Instructions Manual

Listening to the FM radio

Chapter 7:
Listening to the FM radio

Tuning to an FM radio station

Note
• Make sure that you have connected and fully extended the
FM antenna.
1 Press FM on the remote control or INPUT
repeatedly on the main unit to switch the source
to tuner.
2 Press and hold :/9 until the frequency
starts to change.
• To tune to a station at a specific frequency, press
:/9 repeatedly until the desired frequency is
displayed.

Programming radio stations

Note
• You can program up to 30 preset radio stations.
• To overwrite a programmed radio station, store another
one with its sequence number.
1 Tune to a radio station.
2 Press PROGRAM to activate programming.
[XX] (XX indicates the sequence number) blinks.
3 Press / to allocate a sequence number
from 1 to 30 to this radio station, and then press
PROGRAM to confirm.
The preset sequence number and the frequency of this radio
station are displayed.
4 Repeat steps 1-3 to program more stations.
Tip
• Press and holding PROGRAM will allow you to freely
select any radio station. The selected station will be saved
automatically.

Tuning to a preset radio station

/
• Press to select the sequence number of that
preset radio station.

Display RDS information

RDS (Radio Data System) is a service that allows FM
stations to show additional information. If you tune to an RDS
radio station, [RDS] and the station name are displayed.
1 Tune to an RDS radio station.
2 Press DISPLAY repeatedly to scroll
through the available information:
• Station name
• Frequency
• Program type such as [NEWS] (news), [SPORT]
(sport), [POP M] (pop music)...
• Text messages
• CT (Clock Time)
07
19
En