Cooktop Burners - GE JGP628BEC Installation Instructions Manual

Installation Instructions

Cooktop Burners

E
Assembling the Cooktop Burners
E1
The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while
the top of the burner is removed. Do not remove the top or touch the electrode of any burner while
another burner while another burner is turned on. Electrical shock might result.
For Porcelain Cooktops
a. Place the burner head on the burner base, so
that the pins match up with the slots on the
base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the porcelain units. The bottoms
of the burner grates have feet that fit into
corresponding indentations in the cooktop.
BURNER
GRATE
BURNER BOX
BOTTOM
BURNER
CAP
BURNER
HEAD
SPARK
IGNITER
BURNER
BASE
For Glass Ceramic Cooktops
a. Place the burner head on the burner base, so
that the pins match up with the slots on the
base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the porcelian units. The grates fit
over the raised area on the burner head.
BURNER
GRATE
BURNER
CAP
BURNER
HEAD
BURNER
BASE
10
SPARK
IGNITER
GLASS MAINTOP