These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. Caution This unit is designed for negative ground (earth) •...
Turn on Caution • Risk of road accidents! Never watch video or adjust settings while you drive. Press and hold /MUTE/VOL to turn on the unit. The available OSD (On-Screen Display) » languages are displayed. Touch a language to select. The OSD language is changed to the »...
Refer to the map manual (in Chinese) to operate the navigation tool. NAVI to enter/exit the • You can press navigation system. Tune to a radio station Touch the upper left corner to display home menu. Touch [Radio]. Band and frequency information is »...
Pair the Bluetooth-enabled devices To connect your Buetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to eight devices. Turn on the Bluetooth function on the device.
Adjust sound Adjust volume Turn /MUTE/VOL clockwise to increase volume. /MUTE/VOL anti-clockwise to • Turn reduce volume. Mute During play, press /MUTE/VOL. • To turn the sound back on, press /MUTE/VOL again. You can also turn off sound by touching •...