Install Software; Connect And Charge; Connect Gogear Opus To A Computer; Battery Level Indication - Philips SA1OPS32K/02 User Manual

Install software

GoGear opus comes with the following
software:
Philips Device Manager (helps you get
•
firmware updates for GoGear Opus)
Media Converter for Philips (helps
•
you convert and transfer video files for
GoGear opus)
Windows Media Player(helps you
•
convert and transver music and picture
files for GoGear Opus)
Napster player (helps you convert and
•
transfer music files for GoGear Opus)
Important:
Remember to install the software provided in
the supplied CD-RoM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1
Connect GoGear opus to your
computer.
2
Insert the CD that comes with GoGear
opus into the CD-RoM drive of your
computer.
3
Follow the on-screen instructions to
complete the installation of the software.
If the installation program fails to start
automatically:
1
Browse the CD contents with Internet
Explorer.
2
Double click on the file ending with '.exe'.
EN
8

Connect and charge

GoGear opus has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
•
For first-time use, allow GoGear Opus to
charge for 3 hours.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Connect GoGear Opus to a
computer
1
Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2
Connect the small USB plug of the USB
cable to the small USB jack on GoGear
opus.
3
Turn on your computer.
GoGear opus charges.
»

Battery level indication

The display indicates the approximate levels of
the battery status as follows:
100% 75% 50%
A flashing battery screen indicates that
»
the battery is low. The player saves
all settings and switches off within 60
seconds.
25% 0%