Advertisement
Quick Links
WiFi USB Dongle
for DVRs & NVRs
Please disconnect the Ethernet cable from your DVR/NVR.
1.
Connect the USB Wi-Fi Dongle to a spare USB port on your
DVR/NVR.
2.
Right-click the mouse in Live-View mode to display the
Menu Bar. Click "Setup", then click "Network" then click
"Wireless".
3.
Click the "Scan" button. A list of Wi-Fi networks that your
device detects will be shown. Select your Wi-Fi network, then
click the "Save" button.
4.
Enter the password for your Wi-Fi network, then click the
"Connect" button. Make sure the password is correct before
proceeding (click the eye icon to display the password).
Please turn over for more instructions >
QC5000
Advertisement
Summary of Contents for CONCORD QC5000
- Page 1 WiFi USB Dongle for DVRs & NVRs QC5000 Please disconnect the Ethernet cable from your DVR/NVR. Connect the USB Wi-Fi Dongle to a spare USB port on your DVR/NVR. Right-click the mouse in Live-View mode to display the Menu Bar. Click “Setup”, then click “Network” then click “Wireless”.
- Page 2 If the Wi-Fi dongle needs to be removed, click the “USB Wi-Fi” button on the Menu Bar (next to the date & time), then click “Safely remove USB Devices”. Note: Ensure the latest version of Concord software is installed prior to use. Distributed by: Electus Distribution Pty.